Drywall Panel Adhesive


  • High Bond Strength
  • Low Odor Formula
  • Allows Less Fasteners to be Used
  • Bridges Minor Gaps in Framing
  • Reduces Sound Transmission 


  • 28 fl oz (828 ml)


  • Tan (IDH 1498717)

Clean Up

  • Warm Water and Soap

Recommended For

OSI F38 is best suited for bonding gypsum board to wood or metal studs, laminating gypsum board to gypsum board and bonding gypsum board to concrete or block walls. It is widely used in new construction of single-family and multi-family homes, manufactured housing, commercial construction and all remodeling, remedial and renovation projects where drywall or gypsum products are installed. OSI F38 is designed to make installations quick, easy and less costly. When applied as directed, the adhesive combined with the approved mechanical fasteners is the preferred method for permanent, safe installations. It bonds to drywall, paneling, all types of wood trim, plywood, hardboard, OSB, foam board, countertops and similar materials.

For Best Results

Do not use for bonding of two non-porous surfaces. Do not use on cement board (Durock®). Not recommended for underwater applications or permanent water immersion. Not recommended for applications requiring temperature resistance greater than 170°F (77°C). Exterior applications where rain is expected within 24 hours. Use on mirrors and metals that will corrode. Bonding polyethylene, polypropylene, polytetrafluoroethylene (PTFE)/Teflon® or nylon. Adhesive needs to be fully cured prior to applying joint compound and finishing the wall board. Jobsite conditions should be maintained at or above 55°F (13°C) to minimize the effect of temperature, humidity, ventilation, and free moisture throughout the installation and finishing process. 

Products Just as Tough